Industrial RS485 Remote IO Module 8 Channel Digital Signal
Acquisition Converter
Parameters of Remote IO Module ZHT4400
|
1 | | |
2 | | 4 Channel relay input+4 Channel relay output |
3 | | |
4 | | |
5 | | |
6 | | |
- Introduction of Remote IO Module ZHT4400
ZHT4400 is a serial port control module that provides 4 DI, 4 DO
and a RS485 interface, support the standard Modbus RTU protocol,
support dry wet node detection, support relay delay shut down after
opening, we provide comprehensive technical supports. It can be
widely used in pump control, access control monitoring, lighting
control, such as valve monitor application scenario.
Software Function:
Relay status query
Relay independent control and simultaneous control
DO port function setting
DI status query settings
DI port function setting
Logic follow setting
RS485 interface setting change
Device configuration query
Device command log display
Features:
DC9~36V wide voltage
Dual watchdogs, stable operation without downtime for 24 hours
Relay output contact isolation
Dry and wet node detection
Support RS485 communication
Communication baud rate: 1200; 2400; 4800; 9600; 14400; 19200;
38400; 43000; 57600; 76800; 115200; 128000; 230400; 256000; 460800;
921600 (can be modified by software, default 115200)
Communication protocol: Support Modbus RTU protocol
01-30 device addresses can be set, and 1-30 address codes can be
set with the 5-digit address dial switch
ZHT4400 supports modbus RTU, a question-and-answer communication
method, which is simple, versatile and easy to use. Using rs485
communication network, the on-site switch status can be feed back
to the host and the on-site switch valve can be controlled through
this module
| ZHT4400 |
| RS485 Modbus | √ |
| 4 Channel Relay Intput | √ |
| 4 Channel Relay Output | √ |
| Standard Modbus Protocol | √ |
